if you spray it too light the clear is almost dry as it hits the surface it needs to be a reasonably heavy coat while avoiding runs. the paint or clear will have a wet look as it goes on also make sure the day is not too humid as the moisture in the air will impact on the finish
Quote:
|
Originally Posted by BradZ
Wait on. Just had a look, the engine enamal i have is red. The paint i used is just VHT yellow stuff.
So, how many coats of yellow and how many coats of clear are needed?
Temp was around 30.
Jallopy: Not sure what you mean by i put the clear on too dry
|