|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
28-09-2007, 07:52 PM
|
#1 | ||
|
slik
Join Date: Sep 2006
Location: south australia
Posts: 28
|
aftanoon all just wondering if anyone can tellme how and where to disconect auto choke on 86 gc meteor 1.6ltr piece of s...!the car wont idle on its own selfasteam spent hours fidling swearing and cursing and think that it is a problem with the auto choke?checked plugs bit oily leads replaced coil adjusted timing checked vacume hoses of which there is about 2.6million changed fuel filter so basically got fuel got spark drives wont idle.any suggestions incliding best flammable liquid to use to burn it would be greatly appreciated.cheers MIK :gren: :gren:
__________________
:gren: |
||
|
|
|
29-09-2007, 05:27 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
screw the choke adjuster so the butterfly is wide open or use a spring to keep the choke off
choke should operater either via a vaccume pot or a heat spring or water temp piston can you change the choke over to a manual choke using a differnt throttle body and cable
__________________
My car goes Brumm Brumm |
||
|
|
|
|
03-10-2007, 03:17 PM
|
#3 | ||
|
slik
Join Date: Sep 2006
Location: south australia
Posts: 28
|
forgive my ignorance but wot does the vacume pot heat spring or water temp piston look like and wot other causes could should i be looking for :gren: :gren:
__________________
:gren: |
||
|
|
|
|
03-10-2007, 03:42 PM
|
#4 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
i dont have a pictur of that exact carby
pm vippen for more info you will see his name in the posts
__________________
My car goes Brumm Brumm |
||
|
|
|
meteor 1.6ltr 86 gc
Hybrid Mode