Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 13-11-2007, 06:45 PM   #1
tobiasm
Starter Motor
 
Join Date: Jul 2007
Posts: 29
Default Gear issues

Im having some issues with my AU III manual. The gears at times are very difficult to engage, most notably 1st & 2nd especially from a stationary position. When the car is going its a little better but sometimes you really have to fight to get it in gear. The problem isnt always present, at times it will drive just fine.

Can anybody shed some light onto what the problem may be & what it may cost to fix ?

Thanks.

tobiasm is offline   Reply With Quote Multi-Quote with this Post
Old 13-11-2007, 07:42 PM   #2
stiddy
Banned
 
stiddy's Avatar
 
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
Default

Change the oil in the gearbox with a good high quality oil, and possibly add an additive IE. Lubrizol.

Adjust your clutch.. in the engine bay pull on the clutch cable and spin the nut on there either back or forward and you will see in the car that the pedal and either gone higher or lower.. try it out..
stiddy is offline   Reply With Quote Multi-Quote with this Post
Old 13-11-2007, 08:00 PM   #3
waggaclint
FF.Com.Au Hardcore
 
waggaclint's Avatar
 
Join Date: Jul 2007
Location: perth w.a
Posts: 1,074
Default

also check were the clutch cable goes threw the fire wall sometimes they can break away at the firewall....also check the padal as well to see if there is any damage to the pedal box...
waggaclint is offline   Reply With Quote Multi-Quote with this Post
Old 13-11-2007, 09:59 PM   #4
tobiasm
Starter Motor
 
Join Date: Jul 2007
Posts: 29
Default

Im not very handy with the mechanical side of things, but is the clutch cable towards to upper left of the fire wall or is that something completely different ?
tobiasm is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:46 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL