|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
31-08-2008, 05:16 PM
|
#1 | ||
|
Banned
Join Date: Sep 2007
Posts: 855
|
Can someone tell me what steps are needed to replacing a dash fascia on an au xr8?
Would be most appreciated ;) |
||
|
|
|
31-08-2008, 05:55 PM
|
#2 | ||
|
Wanting a sprint!
Join Date: Jul 2007
Location: In Between The Lines!
Posts: 925
|
remove 2 plastic clips at top of cluster then you will see 2 screws under the clips.
Just pull the cluster out and remove maybe from memory 3 wiring harnesses from the back. Then you'll have the cluster out and just unclip the plastic tabs to remove the fascia you'll see how easy it is once its out just maybe use a fork to help leaver the pins of the fascia, Just lift the dials off the cluster they will have a few little clips on the outer,They will just pop off with some pressure. Hope this helps.
__________________
On track for mint turbo falcon |
||
|
|
|
|
01-09-2008, 12:52 AM
|
#3 | ||
|
Banned
Join Date: Sep 2007
Posts: 855
|
Cheers give ill it a go this week some time...
|
||
|
|
|
|
01-09-2008, 11:42 AM
|
#4 | ||
|
2mny projects 2 lttl time
Join Date: Oct 2007
Location: Bald Hills Qld
Posts: 338
|
Mate, after the screws are out they are a pretty tight slide in fit, but sliding out there are parts that can catch.
I had to slide bits of thin bendable plastic between the speedo n dash to get mine out as they are designed to slide IN easy, but don't always slide OUT as easy. |
||
|
|
|
How to change dash fascia on au xr8?
Hybrid Mode