What other model rims fit focus?

leakey · 10-07-2009, 08:31 PM

Hi All, what other model car's rims fit focus?

I will do some research my self, but has anyone else come across rims that fit no probs? I am thinking 17" and up.

Thanks in advance - Leakey

leakey · 11-07-2009, 12:47 PM

Should clarify, I'm after '08 +

But no reason earlier models cant be posted here too for those members.

DZFord · 11-07-2009, 05:44 PM

The Focus' rare 5 x 108 pattern is only really shared with Volvo and Jaguar (S-Type, X-Type), hence the lack of aftermarket alloy wheels available.

I'd start with THIS thread.

insane_executa · 11-07-2009, 08:42 PM

anyone know what tyres fit xr5 rims? like what size/width/profile? thanks

elgreko · 22-07-2009, 01:04 PM

Quote:

Originally Posted by insane_executa

anyone know what tyres fit xr5 rims? like what size/width/profile? thanks

I have XR5 copies on my focus tdci I am running the original size 225 40 18 korean tyres I think they are called mayrun very happy with them cost me $135 each which I thought was really cheep!!!

JutroXR8 · 22-07-2009, 01:43 PM

Quote:

Originally Posted by elgreko

I have XR5 copies on my focus tdci I am running the original size 225 40 18 korean tyres I think they are called mayrun very happy with them cost me $135 each which I thought was really cheep!!!

any pics of the rims?

insane_executa · 22-07-2009, 06:16 PM

Quote:

Originally Posted by JutroXR8

any pics of the rims?

just found out mine are actually replicas, couldnt tell the difference lol's. you can check them out on my thread (09 LV focus)

jabba · 11-07-2009, 09:15 PM

Guys if your wallet can afford it, go for a set off 18's.. They look so damn good and that much better then 17's.. The extra cost would be minimal I would imagine..... Just gave the wifes car a waxing today,,, I'll take a pic tomorrow and post it up...

insane_executa · 11-07-2009, 09:43 PM

yeh im gona go for xr5 rims theyre 18, just need tyres for em'. mates just told me to go for nankang NS2 as theyre decent tyres for the price, can anyone shed any light on this? or a better tyre around the same price? no more than 150 a corner? thanks.

BlackLS · 12-07-2009, 12:54 PM

Quote:

Originally Posted by insane_executa

yeh im gona go for xr5 rims theyre 18, just need tyres for em'. mates just told me to go for nankang NS2 as theyre decent tyres for the price, can anyone shed any light on this? or a better tyre around the same price? no more than 150 a corner? thanks.

You may just get some Maxxis MA-Z1s for that price - But thats pushing it. IMO a much better tyre, especially in the wet. You probably wont get more than 30,000kms out of them.

insane_executa · 12-07-2009, 01:29 PM

Quote:

Originally Posted by BlackLS

You may just get some Maxxis MA-Z1s for that price - But that's pushing it. IMO a much better tyre, especially in the wet. You probably wont get more than 30,000kms out of them.

the xr5 rims i was gonna buy got sold just before i could get to them. bastards! thanks though mate. Now i gotta find something else to put on. No idea what to get its so difficult trying to find a decent looking wheel in 5x108, they're all so chromed up or retarded looking. any ideas where to look anyone?

leakey · 11-07-2009, 11:01 PM

Oh, that thread is great. I couldnt find it when searching?

I have a set of (5) Volvo rims, off an XC70, they're 18" x 7.5", 55mm offset, 5 x 108.

Do you think the 55mm offset will not enable them to be fitted?

Given they cost me nothing, does anyone know machining costs to take a few mills off to say 52mm offset? or if that's even possible?

I like them. Similar to the XR5 wheel. But different!!

elgreko · 22-07-2009, 12:59 PM

what state are you in? there is a place in melb that can machine your rims!

leakey · 11-07-2009, 11:31 PM

Haha, I just realised something. In my first post here, I mentioned I am a Torana fan.

The Torana stud pattern is also 5 x 108. Add it to the list!!

insane_executa · 12-07-2009, 12:06 AM

i think machining the bores is like $15-$25 a wheel so ive been told.

DZFord · 12-07-2009, 03:28 PM

According to alloywheels.co.uk, the Focus offset needs to be between 38 and 52, which unfortunately rules out those nice looking XC70 wheels.

And yes, a lot of the 5 x 108 wheels are chrome / show pony wheels. But for some race style wheels, I'd start by looking at OZ Racing, if the budget allows.

BlackLS · 13-07-2009, 03:46 PM

Quote:

Originally Posted by DZFord

According to alloywheels.co.uk, the Focus offset needs to be between 38 and 52, which unfortunately rules out those nice looking XC70 wheels.

And yes, a lot of the 5 x 108 wheels are chrome / show pony wheels. But for some race style wheels, I'd start by looking at OZ Racing, if the budget allows.

I don't think the 55 offset is gonna cause problems, seeing as the rims are 7.5 wide not 8.

NZ XR6 · 13-07-2009, 11:37 PM

Quote:

Originally Posted by DZFord

According to alloywheels.co.uk, the Focus offset needs to be between 38 and 52, which unfortunately rules out those nice looking XC70 wheels.

Well, that rules out the XR5 rims, which are 52.5 offset! I think you'll find that their advice on offsets is based on what will fit, rather than what is right for the car. I'd be very reluctant to go down to 38 mm on a Focus - it will affect the spring rate and steering geometry.

However, I'd expect that you could go up to a 55 offset without any problems.

leakey · 20-07-2009, 10:09 PM

Well, its a moot point now. We had a break in over the weekend.

They took a few power tools, some really nice brass door handle sets, some acrylic displays (for Gucci and Armani sunglasses) and three of the five wheels I had. The two left have basically no tread, but the other three were 95%.

I rang a couple of dealers and have been told they will cost $799 each to replace.

I dont have receipts, or any other proof, as they were given to me.

The other stuff I get insurance to cover, but they wont even acknowledge the wheels.

Very ****ed off. Time to get a Rotty I think.

NZ XR6 · 21-07-2009, 07:46 PM

Sorry to hear that. Those wheels look good, and I'm sure would suit the Focus.

nickOH · 22-07-2009, 12:20 AM

Quote:

Originally Posted by leakey

Hi All, what other model car's rims fit focus?

I will do some research my self, but has anyone else come across rims that fit no probs? I am thinking 17" and up.

Thanks in advance - Leakey

I just got my rims with a blank fitment, and got them drilled accordingly. Saved a huge hassle.

leakey · 22-07-2009, 04:02 PM

Yeah, keen to see them too.

Little bit of good news for me, a photo showing items that got stolen, has the stacked rims in the back ground. You can make out the top rim, and its the same as the two that are left, so I am saying to insurance co. that as they accepted the photo as proof of one of the items stolen, then this same photo acts as proof of the rims. I only listed power tools as individual items (as they request) and the rest is covered under contents. Might get them back after all!

Any hoo, I would also be keen on seeing a rip off version of those XR5 rims too.

leakey · 22-07-2009, 09:30 PM

How do you know they are replicas? They look spot on to me. If they're the set I think they are that were on Ebay a short time ago with start bid of $1K or buy it now $1.2K then they are genuine. Do you know where else these replicas can be bought from? Much better than the $1.9K others are charging!! PS check the thread of your car. I lowered it for you.

elgreko · 23-07-2009, 02:05 PM

I bought mine on ebay payed $560 and $70 to have them freighted down to melb from syd! They are copies you cant tell the difference unless you put them together! they had no centre caps just popped out my old ones from my 16" and put them into the 18". Will try and get some pics when I work out how to do it!!!!!

Quote:

Originally Posted by leakey

How do you know they are replicas? They look spot on to me. If they're the set I think they are that were on Ebay a short time ago with start bid of $1K or buy it now $1.2K then they are genuine. Do you know where else these replicas can be bought from? Much better than the $1.9K others are charging!! PS check the thread of your car. I lowered it for you.

leakey · 23-07-2009, 03:50 PM

elgreko, did you buy from an Ebay shop or off an individual? I have scoured the web for these, and have only ever found genuine items way above $1k + tyres.

Would appreciate any details you might recall, as $560 sounds bloody good!

elgreko · 25-07-2009, 11:40 AM

Check these out!! http://cgi.ebay.com.au/GENUINE-FORD-FOCUS-XR5-TURBO-18-SPORTS-WHEELS-TYRES_W0QQitemZ200366415295QQcmdZViewItemQQptZAU_C ar_Parts_Accessories?hash=item2ea6c4ddbf&_trksid=p 3286.c0.m14&_trkparms=65%3A10|66%3A2|39%3A1|293%3A 1|294%3A50

Quote:

Originally Posted by leakey

elgreko, did you buy from an Ebay shop or off an individual? I have scoured the web for these, and have only ever found genuine items way above $1k + tyres.

Would appreciate any details you might recall, as $560 sounds bloody good!

leakey · 25-07-2009, 04:20 PM

Thanks a heap!

elgreko · 25-07-2009, 05:28 PM

photos as requested!!

leakey · 26-07-2009, 03:39 PM

Very nice. Exactly the look I hope to have, except mines a CL.

Stock ride height or XR5 springs?

elgreko · 26-07-2009, 05:50 PM

stock ride, Its a TDCI I want to drop it 30mm but I don't want to void my warranty only done 20000kms! Have looked into the springs they are special only for diesels, cos they are such a heavy motor cant use any other springs!

Quote:

Originally Posted by leakey

Very nice. Exactly the look I hope to have, except mines a CL.

Stock ride height or XR5 springs?