mounting pod filter question

[GenesiS]

just a quick question, i read in another post, that when mounting a pod filter in replacement for the exisiting air filter it is ideal to keep the filter in the exisiting air box as to avoid sucking in hot air and defeating the entire purpose of having the pod filter... this i understand

my question is, does this mean to simply remove the airbox cover, bolt the pod on (so to speak) so that it sits in the existing airbox, with the traditional air intake doing its thing, and not replace the airbox cover.

OR

does it mean to place the pod inside the airbox and place the cover back over the pod, so that it is entierly contained within the airbox, in otherwords, if the bonnet is open you would not actually be able to tell the pod was installed.

considering i am looking at purchasing a pod very soon i'd really appreciate any input and problems other people have come accross, noteably those that have el's.

[geckoGT]

best is to modify the airbox to mount the pod enclosed with lid. That way you get the best protection form the heat and still get the improved flow of the pod. There have been a few threads showing how this was done to other member cars, just do a search for pod filters and you should find them

[EDXR8]

Yes you need to modify the lid to fit back on otherwise you will be sucking in hot air. Far easier and just as good to use a good quality panel filter instead though.

[GenesiS]

Originally Posted by EDXR8

Yes you need to modify the lid to fit back on otherwise you will be sucking in hot air. Far easier and just as good to use a good quality panel filter instead though.

i had thought of just purchasing a good quality panel filter that is washable and using that instead... but the **** factor of a pod... lol

but on a serious note, for some unknown reason i really do have my heart set on a pod filter and i dont mind doing the mods to the airbox either...

is there any particulars that really need to be taken into account when it comes to pod filters, or are they all much of a muchness?

[EDXR8]

Originally Posted by GenesiS

iis there any particulars that really need to be taken into account when it comes to pod filters, or are they all much of a muchness?

Just don't go for the cheapies IMO, get a K&N or BMC filter. Carefully size the pod up for the box, you need some room around it to allow adequate flow.

As for the **** factor of a pod, it's inside an airbox so you won't ever see it. It's just a lot of trouble for no gain IMO, but if you don't mind the work then go for it.

[The Dok]

Here's mine, in a BA airbox, but would easily fit an EF airbox. Mod only took @1hr using an EF (cutdown) air intake I had laying around, but as can be seen, is easily to revert back to original, but with the noticable results (on LPG) it'll be staying, will upgrade to a better brand now it's a proven enhancement as this pod is.......entry level.......no point spending heaps till I knew it worked. :eclipsee_

[superloweb]

i think ull find k&n also make a costom airbox and custom pipng to suit most vehicles i plane on having my pod ontop of my engine underneath the "soon to be" gt bonnet scoop