EA water pump into EB..possible?

[ebfalcon13.5]

would a water pump from an ea fit on to my eb if i keep the old pulley and bolt it onto the shaft of the ea pump?:

[EDXR6T]

EA-D are the same.

[ebfalcon13.5]

thought so, just thought that the different belt shapes might mean different pumps. thanks

[eb91xr6]

i have pulled an ED one and it fitted my EA so it will fit (damm EA'S)... never again EB all the way

[ebfalcon13.5]

cool, will i need a new gasket?

[EA2BA]

always advisable to use a new gasket, save doing the job twice, and water pumps are not a fun job. May as well change your coolant while you are at it.

[ebfalcon13.5]

thanks, ive done a fair bit of searching, but does anyone know of a good guide/tutorial for changing one of these?

[[Tonko]]

just jump in and have a crack, make sure you remember what order yo do things, its one of the best ways to learn i reckon.

[ebfalcon13.5]

i just dont want to screw it up and have to do it again

[naughtyfalcon]

easy,remove radiator,take the fan off,,reverse thread,remove the belts by releasing the tensioners,remove the hose,,undo the three bolts and there ya go,,clean surface area and repalce in reverse order...with new gaskets of course.

[ebfalcon13.5]

Originally Posted by naughtyfalcon

easy,remove radiator,take the fan off,,reverse thread,remove the belts by releasing the tensioners,remove the hose,,undo the three bolts and there ya go,,clean surface area and repalce in reverse order...with new gaskets of course.

Originally Posted by OED666

you will also want a new o-ring for the heater pipe that the water pump connects to.

thanks guys

[OED666]

you will also want a new o-ring for the heater pipe that the water pump connects to.

[naughtyfalcon]

no worries,,you should remove the belts after the radiator,,i didn't put it in the right order,,have fun.

[ebfalcon13.5]

just talked to the local wreckers and he said hes got that many falcons around he will just give me a water pump for nothing, but dunno where to get the gasket kit new from. he said he will sell me an ilet manifold for my MPFI conversion for $80 is this a good price

[naughtyfalcon]

thats a good price,,the gasket can be bought from any auto parts shop,,where are you on the central coast,,roughly.

[ebfalcon13.5]

lake munmorah, kinda close to budgiewoi

[OED666]

a new waterpump will cost around $50 from supercheap, including gaskets

[ebfalcon13.5]

Originally Posted by OED666

a new waterpump will cost around $50 from supercheap, including gaskets

thanks ill get one brand new when i get paid from some parts off ebay

[naughtyfalcon]

my ex in-laws used to live there,,pity,,i am to far up the coast to help..

[ebfalcon13.5]

Originally Posted by naughtyfalcon

my ex in-laws used to live there,,pity,,i am to far up the coast to help..

cool, thanks anyway for offering to help, where abouts on the coast are you from

[naughtyfalcon]

i was born in hornsby but was raised in the blue mountains,,now living near tweed heads...and my ex brother in-law still lives in Toukley.