Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 21-04-2007, 04:35 PM   #1
ladderman
Starter Motor
 
ladderman's Avatar
 
Join Date: Jul 2005
Posts: 22
Default AUIII Fairmont Ceiling Console Removal

I broke the latch on the ceiling console of my AUIII Fairmont Wagon this morning (don't ask). :

The little metal latch thing has been dislocated, so the hatch won't stay up any more. Gaffa tape does the job, but looks poor.

I can't figure out how to get the console off so I can see if I can fix it myself.

Does anyone know how to remove these things?

ladderman is offline   Reply With Quote Multi-Quote with this Post
Old 22-04-2007, 10:06 PM   #2
ubuxkl
Starter Motor
 
ubuxkl's Avatar
 
Join Date: Mar 2007
Location: Hobart
Posts: 8
Default

I can't answer your question Ladderman but I need to replace the roof console in my car as the lid is broken. So if anyone can help in connection with where to get a replacement at a reasonable cost, I'll watch other replies to learn how to remove/fit it. Hope you don't mind me piggy-backing on your thread. Thanks.
__________________
Cheers,
Jeff

http://www.aufalcon.com/ubuxkl
ubuxkl is offline   Reply With Quote Multi-Quote with this Post
Old 23-04-2007, 09:15 AM   #3
Robe
Regular Member
 
Join Date: Dec 2005
Posts: 95
Default

Sorry Ladderman but this is just another piggyback.

Does anyone know if the fittings are already there in the headliner in my '99 AU Forte so I can bolt on one of those consoles?

I love the concept! Very "cockpit". I made one for a van I used to have, complete with illuminated switches. The switches did not actualy turn anything on (except the driver) but the effect was excellent. Pre-flight check, destination: the supermarket, set switches to green and red. :nutsycuck
__________________
.
.
Rob Ewart


Bog standard silver BF Wagon, except for the Elvis doll , on gas.



Victorian Rock'n'Roll Dance Association
www.VRRDA.com.au

2015 Victorian Rock'n'Roll Dance State Championships
23 May 2015, Furlan Club, Thornbury
Robe is offline   Reply With Quote Multi-Quote with this Post
Old 28-05-2007, 02:36 PM   #4
ladderman
Starter Motor
 
ladderman's Avatar
 
Join Date: Jul 2005
Posts: 22
Default

Finally figured out how to get this thing out.

Basically, it requires pulling the head lining down back to the b-pillars so you can get in and unscrew the console from the mounting plate that is glued to the top of the headliner. To do this I had to remove the sun-visors, front grab-handle, and the a and b pillar covers.

As usual, its the 2c plastic latch that has broken. With a bit of McGyver work, I managed to dodgy the latch back on with a bolt and some Araldite. The console now closes nicely. Not perfect though, as you need to give it a wack to get it to open.
ladderman is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:03 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL