|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
29-03-2006, 12:04 AM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2006
Posts: 5
|
my other half is swapping his cam as we speak, has undone the tensioner and cant get the chain to come up over the end of the cam?? can someone help??
|
||
|
|
|
29-03-2006, 12:16 AM
|
#2 | ||
|
Banned
Join Date: Dec 2004
Posts: 4,078
|
he released the tensioner but can't get the cam gear off the cam ? that's really weird it should be slack as! or he can't get the sprocket back on the cam ?
|
||
|
|
|
|
29-03-2006, 12:18 AM
|
#3 | ||
|
Starter Motor
Join Date: Mar 2006
Posts: 5
|
yeah he can't get the sprocket back on!! he is gettin really annoyed... the tensioner is apparently fully released.
|
||
|
|
|
|
29-03-2006, 12:20 AM
|
#4 | ||
|
Starter Motor
Join Date: Mar 2006
Posts: 5
|
I have no idea... but there isn't much slack in the chain.. not enough to lift the sprocket back upto the end of the cam (i am a girl so sorry if im not making any sense)
|
||
|
|
|
|
29-03-2006, 12:40 AM
|
#5 | ||
|
Banned
Join Date: Dec 2004
Posts: 4,078
|
when you say released has he pulled the tension out of the side of the block ? You need to remove the plug and the rest of the tensioner will then slide out and give the chain the slack it needs.
|
||
|
|
|
|
29-03-2006, 12:42 AM
|
#6 | ||
|
Guest
Posts: n/a
|
you dont want it t be fully released. spin the motorbackwards by hand just a little bit and it should give you more chain slack. im talking rotate it only a few millimetres at a time.
|
||
|
|
|
29-03-2006, 10:24 AM
|
#7 | ||
|
Two > One
Join Date: Dec 2004
Location: Adelaide
Posts: 7,063
|
Are you trying to put the chain onto the cam gear when the cam gear is bolted to the cam? If so, don't. Put the chain over the cam gear then attach the cam gear to the cam.
Even with the tensioner fully in you can still get the cam gear onto the cam. Ive changed LOTS of ohc's and i've never removed the tensioner, its unnessacary. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Cam Change
Linear Mode
