|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
24-02-2008, 05:46 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Gold Coast
Posts: 698
|
hey guys, well as the title says the right screw to remove the perspex on the cluster is cross threaded..its impossible to get out! i know the only real way to get it out would be to basically brake the perspex but i dont wanna do that so do you think the best idea would be to go to ford and get them to try and get it off? cheers!
|
||
24-02-2008, 05:58 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2006
Posts: 581
|
Dont know what cluster you have but on mine there are no screws holding the perspex on it clips in to place. My cluster has 2 screws up the top under plastic cover caps on the perspex that once removed give access to the screws. The screws hold the cluster in and they screw into one of those sheet metal backing clips which may be turning if thats what your refering to.
__________________
Can't beat a Windsor for sound and low down torque. Liquid Silver Pursuit250 Custom gear and diff ratios ECU Exhaust Crow Comp. Valve springs Adjust. Rollers Cold air |
||
24-02-2008, 06:04 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
You can get the handle of a screw driver up the dash and behind the cluster (I can't remember where from). Put a bit of pressure on the back of the cluster und try to unscrew it. You wont break anything.
|
||
24-02-2008, 06:05 PM | #4 | |||
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Gold Coast
Posts: 698
|
Quote:
|
|||
24-02-2008, 06:06 PM | #5 | |||
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Gold Coast
Posts: 698
|
Quote:
my mate and his dad tried but it wont work the screw is that badly cross threaded it just refuses to come out and i do not want any scratches or marks on the dash which i know that would happen if u try and push a screw driver in there. |
|||
24-02-2008, 08:20 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
i think he means like from down where the pedals are because a screwdriver is skinny it gets where your arm cant ;)
to put a bit more pressure on it from behind
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
24-02-2008, 08:30 PM | #7 | |||
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
Quote:
|
|||
24-02-2008, 09:38 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Gold Coast
Posts: 698
|
thanks for the advice guys i hope that will work.
|
||