|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-11-2014, 03:13 AM
|
#1 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,535
|
__________________
regards Blue |
||
|
|
|
01-12-2014, 06:18 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
looks like some one has ... within hours
post 3 thermostat 15 -171 on a 4 cyl mazda 626 post 4 ford motor end of the head different thermostats fitted to both
__________________
My car goes Brumm Brumm Last edited by dirty hands; 01-12-2014 at 06:24 PM. |
||
|
|
|
|
07-12-2014, 05:22 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
dirty hands, I have the ford motor and the thermostat appears to be in the same place as the mazda 2l. I have to say, this is the first time I have seen the thermostat positioned at the end of the bottom hose. More usually at the end of the top hose (there is definitely no thermostat at the end of the head. ) where heated coolant occurs first. Thanks again to all members who have contributed to this thread. Just on the housing at the end of the head, it is square with no way of fitting a thermostat. I have it off and can see no evidence of a thermostat ever having been there.
dirty hands, re your quote "what is Bathurst without Ford and Holden", what's wrong with a bunch of Volvo's and Audi's trundling around Panorama? Except no spectators. |
||
|
|
|
|
29-12-2014, 07:10 PM
|
#4 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
bathurst ..yes lets see volvos roll over
I see where the confusion is ..got me confused y to the bottom w to the top as mazda engineers see it that location works - for an east west motor - just not sure why , Mazda 15-270 pipe is the thermostat bypass my thoughts 1#the whole water flow is stopped inside the block till the thermostat opens 2#if I read the exploded view correctly that thermostat spring is to the block-- behind the water pump I forget this bit 3#water flow and direction theory in a closed pressurised system hot to cool physics in a radiator 
__________________
My car goes Brumm Brumm Last edited by dirty hands; 29-12-2014 at 07:19 PM. |
||
|
|
|
93 Telstar AX 2 Litre Thermostat Location
Linear Mode
