|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
27-07-2009, 05:16 PM | #1 | ||
Regular Member
Join Date: May 2009
Location: brisbane
Posts: 42
|
hi got meself a series 1 xr8
sometimes when cold and i go into drive the motor starts to knock a bit and the idle dies? would that be the idle solenoid?? im starting to get some niggly faults on it heater switch is broken the clip that holds the flap cable on has snapped, the rear passenger door lock has snapped the worm gear too so its always locked, i can live with that though and the lugs holding the drivers window switch has snapped too so sometimes the window stays down until ya belt it and then its fine looks like a big trip to the wreckers sometimes soon but with the faut goin into drive might give the trans oil a change any tips for doing this on the driveway i can jack it up ok to drop the pan and do the filter but is there any tips to refill the box the hole couldnt be in a more awkward place aye. also it sounds like i have a cold sticky lifter when i start the car it ticks away for about 3 to 4 minuites until they have started to warm a bit then it runs quiet and nice time for a nice new cam and some lifters too then at least the rear shocks top mounts are fine
__________________
au s1 xr8 |
||