|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
29-08-2007, 06:57 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
hey guys
im needing to remove the factory subwoofer and rear speakers ive been told the speakers are a case of popping out the grills/covers and unscrew and remove but the sub is a little bigger than the hole.... how do i remove the parcel shelf or at least get the sub out?? thanks guys
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
29-08-2007, 07:23 PM | #2 | ||
AULTD
Join Date: Mar 2005
Location: Langwarrin
Posts: 818
|
You are correct, the parcel shelf cover has to be removed to remove the sub.
It is held in by those push in plastic plugs, just fold down seats and remove them as well as any plastic bits on the shelf itself. The only real problem is the middle seat belt as it goes through the parcel shelf, but all you do is bend the cover gentlyfrom the centre to clear the side pieces and just leave the seatbelt in place but unraveled and the parcel shelf will be out far enough to access the sub. |
||
29-08-2007, 07:35 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
thanks mate!!
much appreciated
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
30-08-2007, 10:01 PM | #4 | ||
CRE.87V
Join Date: Jan 2006
Location: Newcastle
Posts: 388
|
pull out ur rear base/cushion...undo the two side bolsters with one 10 mm bolt on each side down the bottom...these just pop out pull pushing upwards...undo the 3 christmas tree plugs at the front and the 3 other plugs on the top (just get side cutters onto these)....the tray will then pull toward the front releasing the seat belt with it....replace in reverse...hope this helps
|
||
30-08-2007, 10:05 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
thanks burley!
i was wondering how the bolsters attached
__________________
On The Street Feature Winner Performance Ford Mag See my car at:-www.aufalcon.com/blackers10 |
||
Thread Tools | |
Display Modes | |
|