Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 24-02-2008, 09:21 PM   #1
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default body kit or lowered

hey guys i was just wondering what are your opinions on either putting a full xr50 body kit on my car (costing over 2k) or having it lowered a bit? at the moment i am leaning toward lowering it because of the price and the advantages that it gives to the car, ie handling.

any opinions much appreciated

Krakey

__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 24-02-2008, 09:29 PM   #2
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

I'd be lowering it. They look ok as it is without a kit.
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 24-02-2008, 09:36 PM   #3
GK
Walking with God
 
GK's Avatar
 
Join Date: Mar 2005
Location: Melbourne
Posts: 7,321
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

I'd be lowering it first for sure. I'd go the kit later on, after you've sussed out the numerous options available.

GK
__________________
2009 Mondeo Zetec TDCi - Moondust Silver

2015 Kia Sorento Platinum - Snow White Pearl

2001 Ducati Monster 900Sie - Red

Now gone!
1999 AU1 Futura Wagon - Sparkling Burgundy
On LPG



Want a Full Life? John 10:10
GK is offline   Reply With Quote Multi-Quote with this Post
Old 24-02-2008, 09:41 PM   #4
BFD83
FF.Com.Au Hardcore
 
BFD83's Avatar
 
Join Date: Mar 2006
Location: Gold Coast
Posts: 698
Default

yeh definitely lowering it first man!
BFD83 is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 04:25 PM   #5
AU2PWR
Spin 'em Habib !
 
AU2PWR's Avatar
 
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
Default

Lower it dude ..
__________________
AU2PWR

AU2PWR is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 04:47 PM   #6
Pistonbroke
Regular Member
 
Join Date: Feb 2006
Posts: 63
Default

Go low. It will look great without a body kit. However it wont the other way round...
Pistonbroke is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 04:52 PM   #7
aye you
The Origional, The Best
 
aye you's Avatar
 
Join Date: Dec 2006
Location: Darwin, NT
Posts: 709
Default

lowering, one less urban AU 4x4 will make the rest of us look that bit better
__________________
Current Mods
2.5" Red Back Exhaust | C2R Grill | Brumby Front Bar & Driving Lights | 18" Optic Blacks | Tickford Intake | Blue Momo Shifter Knob & Wheel | BA Scuff Plates with Ford Metal Inserts
Future Mods
Lowerage on KingSprings Lows | Engine...Period | Sounds System

I Use And Recommend F1 Tyres And Wheels On The Gold Coast

Proud Supporter of Beat The Heat (NT)
aye you is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 05:17 PM   #8
Dezza
Parts bin special
 
Dezza's Avatar
 
Join Date: Mar 2005
Location: Narre Warren, Vic
Posts: 8,276
Default

Definately lowering. Lowered cars without bodykits look good. Kitted cars with stock suspension look crap. Ideally lowered with bodykit is the way to go.

btw krakey, I had the same avatar on another forum, but mine was animated. Hypnotoad ftw!
__________________
Weekender 1964 US Falcon Futura convertible - Rangoon Red
260 Windsor V8, 4 speed manual, LHD, Electronic ignition, Mustang wheels
https://fordforums.com.au/showthread.php?t=11470868

Daily 2014 SZII Territory diesel - basic runabout

Previous Cars 1990 EAII Fairmont Ghia - Tickford engine, 5 speed, SVO wheels, bodykit, much more
2000 AUII Fairmont - XR wheels, Ghia interior
2010 FG XR50T ute - XR8 bonnet, Streetfighter intake
Dezza is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 05:50 PM   #9
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

yea im set on lowering it now. I went to repco today for a quote on king springs shocks and coils and they quoted me $777. Is it just me or is this a little.....well high?

haha yea Dezza! all hail hypnotoad!

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 05:53 PM   #10
AU2PWR
Spin 'em Habib !
 
AU2PWR's Avatar
 
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
Default

VERY HIGH ..

My Superlows all around only cost $450 !
__________________
AU2PWR

AU2PWR is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 06:26 PM   #11
WoodysXR6
Wanting a sprint!
 
WoodysXR6's Avatar
 
Join Date: Jul 2007
Location: In Between The Lines!
Posts: 925
Default

Yeah slam it down forsure.
__________________
On track for mint turbo falcon
WoodysXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 07:06 PM   #12
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

i thought it was a bit high..... The reason the guy said it was so expensive was because of the irs. AU2PWR are your superlows irs?
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 07:15 PM   #13
AU2PWR
Spin 'em Habib !
 
AU2PWR's Avatar
 
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
Default

Nope , Live Axle .. IRS shouldnt Be that much Expensive ..
__________________
AU2PWR

AU2PWR is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 07:20 PM   #14
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

hmmm damn repco and your deciet.........
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 07:39 PM   #15
AU2PWR
Spin 'em Habib !
 
AU2PWR's Avatar
 
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
Default

Better off going to Like a Performance Shop and getting them to get the parts in at cost , and stuff ,,
__________________
AU2PWR

AU2PWR is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 08:32 PM   #16
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

yea true that but only problem is is that performance shops are few and far between out here in the country sticks.... might have to do a trip up to melb. Has anyone bought irs king springs recently and for how much?

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 08:35 PM   #17
Oo_xrsx_oO
t i c k f o r d
 
Oo_xrsx_oO's Avatar
 
Join Date: Mar 2007
Location: Melbourne
Posts: 183
Default

I put a set of lovells superlows and koni reds to match for around $1K and there is no comparison to how it used to handle and looks 10x better to boot
__________________
AUIII XR6 VCT

Liquid Silver / Manual / Leather / Momo Wheel & Shifter / Premium Sound / Lovells Superlows / Koni Reds / T3 Pursuit Rims / Pacemaker 4499s / 2.5 Inch Exhaust
Oo_xrsx_oO is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 11:33 AM   #18
V3RSAC3
... Fear it!
 
V3RSAC3's Avatar
 
Join Date: Apr 2007
Location: Adelaide
Posts: 2,869
Default

mate, i wouldn't pay over $350 for it to be done thats King springs and installed ... i'd look at bob jane t-marts, or anything that u have over in Vic like that!
__________________
Quote:
Originally Posted by Mr Hardware
Just remember gents, anyone can follow fashion, but it takes someone with real class and finesse to have Style.
Chrysler 300C Sedan
SY Territory Ghia
V3RSAC3 is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 11:59 AM   #19
sly
Sly like a G6
 
sly's Avatar
 
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
Default

Quote:
Originally Posted by AU2PWR
VERY HIGH ..

My Superlows all around only cost $450 !
Quote:
Originally Posted by v3rsac3
mate, i wouldn't pay over $350 for it to be done thats King springs and installed ... i'd look at bob jane t-marts, or anything that u have over in Vic like that!
Check his post again fellas... the quote from Repco included shocks not just the coils. Once you allow 3-400 for the shocks the price for the springs is at least in the ballpark. They may be cheaper elsewhere but they're not outrageously expensive.

krakey if you want the full handling advantages of lowering you need to fit the shocks to match the shorter springs. And I'd have the caster & camber checked at the next wheel alignment to see if an adjustable camber/caster kit is needed.
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring.

Sleeper, anyone?
sly is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 06:57 PM   #20
fipcee
not so stock
 
fipcee's Avatar
 
Join Date: Apr 2005
Location: Brisbane North
Posts: 218
Default

Hiya Krakey I notice that your car is an XR6, I had mine lowered for $400 bucks at Bob Jane because they looked up the standard XR6 shocks and the book stated that they are fine for lowering. I must admit that I didn't go superlows, just lowered it a further inch. IMO have a chat with a suspension specialist (obviously you could do that over the phone) and see what they have to say. I originally went to Pedders and whilst they tried to sell me the "whole package" they also confirmed that the XR6 shocks are fine. So thanks to an interest free credit card my car was lowered with new tyres and mags.
__________________
Liquid silver AUIII XR6, BA scuff plates with Tickford inserts, proudly displaying AU falcon.com stickers, lowered, K&N panel filter with wide mouth snorkle, 2 1/2 exhaust and hi flo cat, Illusion mags, slotted and drilled rotors.
Next mods: extractors

Last edited by fipcee; 26-02-2008 at 06:59 PM. Reason: terrible spelling
fipcee is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 07:19 PM   #21
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

Quote:
Originally Posted by fipcee
Hiya Krakey I notice that your car is an XR6, I had mine lowered for $400 bucks at Bob Jane because they looked up the standard XR6 shocks and the book stated that they are fine for lowering. I must admit that I didn't go superlows, just lowered it a further inch. IMO have a chat with a suspension specialist (obviously you could do that over the phone) and see what they have to say. I originally went to Pedders and whilst they tried to sell me the "whole package" they also confirmed that the XR6 shocks are fine. So thanks to an interest free credit card my car was lowered with new tyres and mags.
hey fipcee i have been reading up on this option as well and i have read that the ride quality is rather poor and is pretty much stiff as a....
Have you found this on your car or have just putting the springs on been fine?

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 07:30 PM   #22
fipcee
not so stock
 
fipcee's Avatar
 
Join Date: Apr 2005
Location: Brisbane North
Posts: 218
Default

Quote:
Originally Posted by Krakey
hey fipcee i have been reading up on this option as well and i have read that the ride quality is rather poor and is pretty much stiff as a....
Have you found this on your car or have just putting the springs on been fine?

Krakey
Hiya Krakey,
The ride is a bit rough (particularly here in BrisVegas with the roads the way they are) however never having had a car lowered before I cannot accuratley comment on just "how" rough. Mate I'm 40 yrs old and ex Army/sporty person so I carry a few injuries and frankly I don't feel any aches or pains . Been lowered for about 18 months now and I haven't noticed any excess rattles that you could expect if the car was getting knocked around. I guess you get what you pay for Krakey but I am very happy with the ride and the handling. The only time I really notice the rough ride is when I have a full tank of petrol and four people in the car. I suppose it comes down to your budget. Mate with a lazy grand in the sky rocket I'd go the whole hog but I really cannot complain, you just learn where the pot holes are Good luck with your decision.
__________________
Liquid silver AUIII XR6, BA scuff plates with Tickford inserts, proudly displaying AU falcon.com stickers, lowered, K&N panel filter with wide mouth snorkle, 2 1/2 exhaust and hi flo cat, Illusion mags, slotted and drilled rotors.
Next mods: extractors
fipcee is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 07:46 PM   #23
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

Can i try just the springs and then if i decide later on to go the shocks as well can i put them on without any troubles?

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 08:02 PM   #24
fipcee
not so stock
 
fipcee's Avatar
 
Join Date: Apr 2005
Location: Brisbane North
Posts: 218
Default

Quote:
Originally Posted by Krakey
Can i try just the springs and then if i decide later on to go the shocks as well can i put them on without any troubles?

Krakey
Mate I would see no reason why not, that was my original plan but as previously stated I am happy with my current set up. Having said that I have nearly 85000kms on the clock so will be thinking about changing the shocks resonably soon anyway and I WILL look at the "better" option. The way I see it I have spent the 400 bucks 18mths ago so am over that pain of the purchase so now I will only need to find an additional 300 or so and will have the whole set up. I am not that mechanically minded so I"m certain others on this forum will set you straight if I'm wrong but I see no reason why it should be a hassle to do what you suggested, have a crack at the springs, if not happy bung in the shocks down the track. At least the springs will have time to settle.
Cheers, Fipcee
__________________
Liquid silver AUIII XR6, BA scuff plates with Tickford inserts, proudly displaying AU falcon.com stickers, lowered, K&N panel filter with wide mouth snorkle, 2 1/2 exhaust and hi flo cat, Illusion mags, slotted and drilled rotors.
Next mods: extractors
fipcee is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 08:47 PM   #25
matt9889
new kid
 
matt9889's Avatar
 
Join Date: Jun 2007
Location: vic
Posts: 25
Default

i got mine lowered at pedders, they put new springs in all around and new rear shortened shocks in aswell as a check on all the other components and a wheel alignment for around $750. The pedders guy wasn't talking much more $$$ for an irs setup so $800 fitted with new rear shocks is an alright benchmark i'd say. handles awesom too.
matt9889 is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 09:57 PM   #26
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

damn looks like i have some saving to do haha. Also i am contemplating putting 18" rims on later in the year so how much would a 1 inch wheel increase change the suspension setup?

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 10:00 PM   #27
AU2PWR
Spin 'em Habib !
 
AU2PWR's Avatar
 
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
Default

Lots , it will chuck the Alignment , Camber and Toe out heaps .. I Scrubbed 2 Brand new Kumhos out in 2 months .. the outer was New , inner was wire !
__________________
AU2PWR

AU2PWR is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 10:11 PM   #28
Krakey
love thy ford
 
Krakey's Avatar
 
Join Date: Dec 2006
Location: wangaratta, vic
Posts: 92
Default

haha ok well looks like im gonna be saving for a while before i can get this done then. BA XR8 rims are looking good atm to replace my 17" AU1 xr8 rims but money is always has to be the problem doesnt it! sure makes me a sad panda.

Krakey
__________________
AUII VCT XR6 MANUAL
Krakey is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 10:47 PM   #29
Elks
FF.Com.Au Hardcore
 
Elks's Avatar
 
Join Date: Dec 2006
Location: Melbourne
Posts: 4,523
Default

Forget the bigger rims. Lower it. Once it's sitting low you wont need to fill the wheel arches. Cheeper to do and Cheaper to run.
__________________
Oooh baby living in Miami....
Elks is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:01 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL