EB GT Brake Light

[browser351]

Hi All
Can any body tell me where I can purchase a replacement LED light that is in the rear spoiler of my EB GT. I believe you have to buy the whole light assembly, that is, you cannot just replace the bulb.
Cheers
G.K.

hey i would like to know the same thing. half the bulbs are gone in mine.

[sbcb]

I think most spoiler lights are sealed units, thus replace the lot or prize it open, solder new leds in and reseal the unit (not recommended or easy).

Try an aftermarket spoiler company, they might have a fit that is cheaper.

Originally Posted by sbcb

Try an aftermarket spoiler company, they might have a fit that is cheaper.

such as??

[jedaarr]

Originally Posted by browser351

Hi All
Can any body tell me where I can purchase a replacement LED light that is in the rear spoiler of my EB GT. I believe you have to buy the whole light assembly, that is, you cannot just replace the bulb.
Cheers
G.K.

I bought a replica eb gt kit & they are identical to
the originall- u can buy the led from most bodykit
suppliers on telling them its a eb gt led insert. :

have been told that it isnt hard to change the LED's but you do have to break the casing open and it can go badley if not done right. since a lot of mine are out i might just give it a bash, might just have to go without spoiler light for a bit if i break it.

[InitialD]

Originally Posted by mockgt

have been told that it isnt hard to change the LED's but you do have to break the casing open and it can go badley if not done right. since a lot of mine are out i might just give it a bash, might just have to go without spoiler light for a bit if i break it.

It isnt hard at all ;) ive done it to a few spoilers. Aslong as you have a decent soildering iron and some patience you can do it.

the red LEDS are like $1 max each from Dicksmith

apparently the hard part is not breaking the casing.

[InitialD]

Originally Posted by mockgt

apparently the hard part is not breaking the casing.

If you can separate a EB taillight, you can separate a LED brake casing :P :

Originally Posted by InitialD

If you can separate a EB taillight, you can separate a LED brake casing :P :

fair enuf but personally ive never separated an EB taillight so yeh

[jedaarr]

Originally Posted by mockgt

have been told that it isnt hard to change the LED's but you do have to break the casing open and it can go badley if not done right. since a lot of mine are out i might just give it a bash, might just have to go without spoiler light for a bit if i break it.

The whole gt led insert can be bought for around $45- $70 it is
a lot easier to just replace it, i had a stock type boot spoiler
once & it was very rusted internally the (led ) tried to fix it
a *** of a job-gave up.

[TIKFD6]

Originally Posted by InitialD

It isnt hard at all ;) ive done it to a few spoilers. Aslong as you have a decent soildering iron and some patience you can do it.

the red LEDS are like $1 max each from Dicksmith

Jaycar LED's are cheaper than DSE.

Its an easy job, getting the unit open is the hard bit.

[GTFalc0n]

Hi, I know it's an old thread but others might find this useful. my LED brake light just broke and I found the part at SSV
http://ssv.com.au/product.php?0243

Did the job, also repairing the original