Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > OzECruisers (E/N/D Series) > OzECruisers General Discussions

OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS

Reply
 
Thread Tools Display Modes
Old 29-08-2005, 04:49 PM   #1
Simmo
White Lightning
 
Simmo's Avatar
 
Join Date: Dec 2004
Posts: 1,870
Default questions for ea-ed manual owners

getting my car converted to 5spd and my mech has hit a few little issues.

1) if you have cruise control and a manual does it switch off/coast when you hit the clutch? since im auto i dont have a sensor in place for this.

2) if youve converted what did you do about the bump stop for the 3rd pedal and the pedal return spring?


Last edited by Simmo; 29-08-2005 at 04:57 PM.
Simmo is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2005, 05:38 PM   #2
Damo
Banned
 
Join Date: Dec 2004
Posts: 4,078
Default

cruise will deactivate when the clutch goes in.
I don't know what you mean by 'bump stop' ? The return spring clips onto a little slot in the firewall.
Damo is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2005, 06:02 PM   #3
Simmo
White Lightning
 
Simmo's Avatar
 
Join Date: Dec 2004
Posts: 1,870
Default

apparently on the ef pedal i got theres a bit to stop the pedal going too far. but i got a pedal pin from mal wood so he doesnt have tp change the whole pedal box, just slap the clutch pedal on.
Simmo is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2005, 09:45 PM   #4
BoZZa17
Lovin the Manual.
 
BoZZa17's Avatar
 
Join Date: Jan 2005
Location: Hoppers Crossing
Posts: 331
Default

i converted mine few weeks ago
the cruise wont turn off unless u put the extra vacume type switch on the pedal, which yours will not have the mount for as you did not change the pedal box

so basically your screwed there

and the same goes with the stopper for the clutch pedal i guess,
as you have an auto pedal box it wont have any sort of stopper for the manual pedal, so id say your screwed there once again

the only way i can see you can fix this problem is to pull the dash out and to change the pedal box over to a manual one....

however this is from my experience....
now i come to think of it... i dont think mine has a stopper?, just make sure he attatches the spring that goes to the firewall and that will stop it from coming too far forward
BoZZa17 is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2005, 10:29 PM   #5
Simmo
White Lightning
 
Simmo's Avatar
 
Join Date: Dec 2004
Posts: 1,870
Default

ok. i cant see why the cruise/pedal problem would be that bad. if you were hitting the brakes youd be on the clutch at the same time and if you just pressed the clutch the engine would just rev up.
Simmo is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:10 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL