AFF National Dyno Day All States.

[XTC 190]

Few more

[pecker73]

Originally Posted by EASYBOSS

Why are the results listed in HP when the runs are measured in KW?

Thanks for asking that ! Was wondering that. Though it was a 'Queensland' thing..

Are the HP measures the same as KW ?

[BionicGT]

Originally Posted by pecker73

Thanks for asking that ! Was wondering that. Though it was a 'Queensland' thing..

Are the HP measures the same as KW ?

No. Power (kW) = Power (HP) x 0.7457

In NSW, the dyno runs were recorded in kW

[Ives]

I had a great time!. Thanks to Spoolman, Autotech and the crew for organizing the NSW section of the AFF 2nd Annual Dyno Day.

It was good to meet some new people from the forum and see a lot of different cars on the day.

[EASYBOSS]

OR

Power (HP) = Power (KW) x 1.341

[melbzetec]

So none of the class 1's turned up in Qld???? I wanted to see what Rob's car was going to do

And what the hell were you driving in Sydney Sean (Photn)? Is that how powerful a Fiesta on its roof is? Or have you tricked up Matt's car already??

(But you're not going to like the Vic result when you see it!!!LOL)

A big thankyou to the Melbourne crew, and to GD and their MAGNIFICENT new facility. And a special thanks from me for setting up for the only FWD of the day in Melbourne. Thanks guys

[XTC 190]

[Ives]

Originally Posted by melbzetec

And what the hell were you driving in Sydney Sean (Photn)? Is that how powerful a Fiesta on its roof is? Or have you tricked up Matt's car already??

One of our friends decided to take Sean's spot since Sean didnt have a car to run on the dyno. It was a stock Fiesta XR4.

[fiery]

Originally Posted by melbzetec

So none of the class 1's turned up in Qld???? I wanted to see what Rob's car was going to do

We had no-one for Class 1 or Class 5 hence making a third in Class 2 and Class 3. It was talked about and on the help and advice of Gill (hope I spelt your name right), she is the wife of Steve (both being the RDP owners) we did a 3rd place.

[KPM_Mark]

Thanks to everyone who turned up, we hope you all enjoyed the day, we had a great time, and have only just finished now at 3:30pm

Well done to everyone who got a trophy or lucky dip prize.

Here are the results, I will post some pictures later.

Sorry guys I have all the results down by name and not your forum username, if anyone wants this changed let me know.

Class 1
4 Cylinder N/A
No Entries

Class 2
6 Cylinder N/A


Name________________Car___________________________ ___RWKW


XRChic_________BA XR6__________________________188.0KW

MoreHPformyXR6________BAII XR6________________________147.3KW

fresh6_________EF Futura_______________________139.1KW

brett EA____________Falcon EA________________________137.1KW

benny_mac___________EF Falcon XR6____________________127.5KW

Mack 6__________AU Falcon________________________125.3KW

ATMO SIX__________BA XR6__________________________124.6KW

tonyb126________Falcon AU________________________111.9KW

NL Ghia__________Fairlane NL_______________________108.2KW

WiggyMk2___________EF Falcon________________________107.4KW

wiggum_o4____________EBII Wagon_______________________90.1KW



Class 3

8 Cylinder N/A



Name________________Car___________________________ ___RWKW



Greg Sparks___________Falcon BF GT_____________________222.3KW

Mark Farrell___________BA MK2 XR8_____________________209.3KW

paddy351___________Ford XW GT_____________________193.0KW

Graeme Murphy________BF XR8__________________________191.5KW

Ashley Robinson_______AUII XR8________________________161.0KW

XRLNT-8__________XR8 Falcon______________________152.5KW

Daniel Shigroff_________AU Fairmont Ghia________________148.2KW

Michael O’Donnell______Mustang GT390___________________141.6KW

SLY*302_______EL Fairmont Ghia_______________________138.7KW


Class 4

Forced Induction



Name________________Car___________________________ ___RWKW


svo88_____________XA Coupe_______________________342.4KW

Jonathon Ruckett_______FPV Force 6_____________________317.4KW

Robert Bigg___________BA XR6 Turbo____________________239.2KW

Fred Nenesleft_________BF F6 Typhoon___________________227.3KW

Brad Day_____________BA XR6 Turbo____________________225.0KW

Michael Baragwanah____XR6 Turbo_______________________209.7KW

Mark Bataev__________BF XR6 Turbo_____________________204.7KW

tick5.0___________EF XR8__________________________191.2KW



And our Show'n'Shine winners:

1st Place Wayne Pengilly Toxic F6
2nd Place Simon Hewitt BF F6

[Filthy GT-P]

I went to G & D in Dandenong

Caught up with quite a few members, main purpose of the day really, fun day.

Whoosha cooked up some great hamburgers.

Class 3

Run 1 266.0 rwkw
Run 2 267.0 rwkw.

Last national dyno day i think I was 250.3 rwkw

I am ecstatic with the improvement Thanks Ross at The Blue Oval Garage for helping me look after one of my pride and joys.

Regards


Steven

[TUF270]

we had pretty low numbers in qld...i dont quite get it...

[MoreHPformyXR6]

It was a great day thanks to David and the boys @ KPM Motorsport for putting on a great day for SA AFF members. The weather was sweet and it was nice to catch up with the SA crew and put some names to faces.:

PS Jac & Eamon thanks for letting me have a drive of the black beast. :

[montyv8]

where were all the Xseries?? none in QLD apart from the XF, two or three in NSW, two + a mustang in SA... where's everyone hiding?

not that i can talk lol...

[LS2 KLR]

What a good day. Thanks Spoolman, autotech and all the attendees. Was good to meet new people and see some insane dyno graphs. Would have to say highlight for me was seeing RAPID6's power curve. An almost vertical increase of about 200rwkw was sensational. So cheers everybody for a wonderful day, Evan.

[Stav]

A big thanks to Spoolman and autotech engineering for a great event.It was nice to meet the guys from the forum and Nick behaved well.

Before i left I promised I would post my dyno for guys to have a look at.An untuned wagon did its bit today and pulled 141.3 rwkws.10 killowatts more than a tuned dev 4 cam in standard head setup. It would be nice to see your dyno sheets as well if you feel like it.
Thanks again
Stav

[XTC 190]

there you go
BA XT n/a 6

[melbzetec]

Originally Posted by Ives

One of our friends decided to take Sean's spot since Sean didnt have a car to run on the dyno. It was a stock Fiesta XR4.

Very smooth.

[asusdragon]

well i just got home from the Perth Dyno day had a great day met aload of ppl from here and well the BA with just exhaust and extactors pulled a 151.2rwkw or bout 202rwHP, so pretyy happy with that cheers to BPT for hosting it, and well i now got a few ideas of further mods which will include a BF F6 airbox, 3inhc piping, BMC panel filter and a sniper tune, should get up to 166rwkW, which will be great

[Zed7fiddy]

Was a great day for QLD, short n Sweet

I was happy with the car and tis first ever run, 2nd place and a Trophy was a nice surpise too

[XRchic]

Hi all

Thanks to KPM and all the guys there who worked really hard for the day - those guys do some seriously hard work with all the strapping down and breathing in all those fumes!!!

We had a great turnout and it was really good to meet a lot of new people and catch up with a few oldies! Had a really good day.

I have a pic of every car which ran, on the dyno and the big screen with the graph after - well I hope I have! If I have missed out for anyone, I am really sorry. I was running around all day doing something! I am the process of downloading them, resizing them and getting them on to photobucket - and hopefully in the correct order, so that will take a bit of time!

Cheers

Jac

[jimt3te50]

I took this alright last night but am spewing I missed it- really would have liked to have attended and meet everyone. Well done to everyone who helped organise it and to everyone who was lucky enough to have been involved....

some outstanding results so far

[FRDGAL]

Any info on VIC results?

[AU1XLS]

Originally Posted by FRDGAL_AU6

Any info on VIC results?

not tellin you should of come

[Pinkbits]

Originally Posted by montyv8

where were all the Xseries?? none in QLD apart from the XF, two or three in NSW, two + a mustang in SA... where's everyone hiding?

not that i can talk lol...

I put mine on only for a demo run.
stock 302 with 2" twin sys, 4 bbl inlet with 600 Holley.
1st run 118.7kw
2nd run 119.2kw

[banarcus]

Finally got back home from Sydney. Well what a day, there were some real fair dinkum cars there! Plenty of nice Fords from the Esky RS to the BA F6 at the end.

That was the first time I've been to a dyno joint and I wasn't disappointed. I was very pleasantly suprised with my BA V8 as I was expecting somewhere between 200-210 but with 218kW with only a catback and homemade cold air I couldn't be happier all on standard 91 unleaded.

What I did learn was that anything turbo is really in a class of its own. RAPID6 ute burning rubber on the dyno, something I have never seen in my life!!

[russellw]

A huge thanks to all the shops that provided staff and expertise on a Saturday for us. Thanks also to fiery, Spoolman, Laminge and the other helpers in the States that collated information and helped with the organisation. This is quite a large logistical exercise and without Spooly's hard work it wouldn't have happened.

In Vic, my thanks to Glenn and the G&D crew along with Whoosh and Tracey for keeping the BBQ fired up all day - an outstanding effort.


Housekeeping

1. I will start a thread in the Vic section so that results can be posted by each individual as we didn't get an overall record.

2. If the SA users could PM me so that I can match the names to their user names I will amend the post above.

3. The WA results need to either be posted here or PM'ed to me.

Cheers
Russ

[WiggyMK2]

The SA day at KPM was great! Very well organized. I even won a lucky dip prize! The only thing dissapointing was my cars performance on the dyno.

Wiggy

[Sledgehammer]

Originally Posted by TUF240

thanks for the pic mate. and jo, ur car is a fully burnout car bro :P who was the grl taking the pictures in the dyno room itself? she took heaps...i wana c the pics she took and any others from any1...cant get enuf pics :P lol

That's Kate, our PFM photographer. We will have to wait for the mag.

[KPM_Mark]

I have got over 100 pics from today, I will sort them out over the weekend.

But here are a few to start with