|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-01-2007, 02:16 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2006
Posts: 48
|
Just a small question....
does anyone know if the au temp guage is a sender straight to the dash or is it a digital thing from the ecu....?? Thanks Cam |
||
|
|
|
14-01-2007, 03:32 PM
|
#2 | ||
|
TL40 Wagon?
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
|
The temp sensor is just a temperature dependent resistor. The ecu reads the signal to control the thermo fans and the adjust fuel ign etc including limp home mode so be careful. If you put in a 50k pot you can turn the fans on and go into limp by a turn of a knob.
not very useful but interesting. making it think its colder makes it run rich and hotter lean to a point where you are back in limp home. |
||
|
|
|
|
14-01-2007, 04:06 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
|
The temp sender would run to the cluster & the ecu
It is located at the back of the head against the firewall (in a 6cyl) |
||
|
|
|
AU temp sender to instruments
Linear Mode
