Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 26-03-2007, 08:18 PM   #1
all4fordau
Regular Member
 
Join Date: Oct 2006
Posts: 98
Question Looks Like My Transmition Is Leaking

I have an obvious leak from my auto trans. First noticed a patch of oil on the garage floor and after panicing I had a look to find it at the back of the auto box. Does anyone out there have this problem that they have fixed themselves??? It is an I6 Forte with 100k on the clock. Should I service the whole deal? The car has been sitting for about 6 months as i have been working overseas, but it fired up straight away. Not even a flat battery!!! Just a suspect seal or something in the auto.

all4fordau is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2007, 08:20 PM   #2
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

Get under and work out where it is leaking from
If it is just the oil pan give it a service and new gasket and it'll be good as new
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2007, 08:21 PM   #3
Racecraft
they call me Tibbo
 
Racecraft's Avatar
 
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
Default

if it is the back of the box, chances are it is the rear seal on the extension housing where the tailshaft goes. AS it has been sitting the bottom of the seal would have compressed a tad, hence the leak.. It is a $4 part
__________________

Racecraft is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2007, 08:24 PM   #4
all4fordau
Regular Member
 
Join Date: Oct 2006
Posts: 98
Default

Yes i had a look under and it appears to be from somewhere up the top of the tail shaft. I am thinking the seal at the rear. I have taken it for a good run this arvo and the spray pattern seems to be from up there somewhere. Think I'll leave this one to the experts????
all4fordau is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2007, 08:39 PM   #5
TwistedEL
FF.Com.Au Hardcore
 
TwistedEL's Avatar
 
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
Default

Nah save your money and DIY it is easy
TwistedEL is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2007, 08:39 PM   #6
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Search Search search!

Its all here http://www.fordforums.com.au/showthread.php?t=21444
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2007, 10:14 PM   #7
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Just check that its not excess fluid coming out of the breather at the top, mine has done it and it looks like its leaking fluid when all it is doing is coming out the breather at the top. As it heats up it can overflow and come out there.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2007, 10:41 PM   #8
gregaust
Donating Member
Donating Member1
 
Join Date: Dec 2004
Location: QLD
Posts: 11,838
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Greg always goes out of his way to provide assistance and support to members of AFF. Greg freely shares his knowledge with people who ask for help and often assists them with obtaining parts and repairs.  A great member of the AFF community. Technical Contributor: For members who share their technical expertise. - Issue reason: Always happy to offer assistance from his own experiences and often posts up photos when someone is having issues finding/locating something they are trying to repair or replace. 
Default

If the seal is leaking do the bush too,trust me it will be worn
gregaust is offline   Reply With Quote Multi-Quote with this Post
Old 27-03-2007, 05:37 PM   #9
JoesAu
...
 
JoesAu's Avatar
 
Join Date: Apr 2005
Location: Geelong
Posts: 1,407
Default

get it fixed quick smart
JoesAu is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2007, 11:20 AM   #10
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

The problem with the autos is that .... when they leak .. it drops from the back of the pan ... everytime ... so it looks like it is leaking from the back of the pan.

I had an ongoing leak in mine and found it was from the servo on the side of the transmission ... but it dribbled into the crease where the pan gasket is and then dripped from the back of the pan.

If the fluid is really coming out from the breather at the top of the auto ... and I mean a lot ... it usually means the auto is on it's last legs anyway.

Extension housing seals are common to go on them as well.

A good link to check out for the BTR transmissions is here:
http://www.fordforums.com.au/showthr...atic+servicing

It shows how to service ... and also where common leaks are coming from as well. Also how to flush and troubleshoot other problems.

Happy reading.

And I should have looked at Jonbays post ...as it has the same link as mine.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2007, 01:26 PM   #11
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

I have just found I've got the same issue, but don't have **** all tools here. What sort of dollars will I be looking at to get it done in shop?
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2007, 09:25 AM   #12
all4fordau
Regular Member
 
Join Date: Oct 2006
Posts: 98
Default

Yesterday I had the whole thing serviced and while they were at it i had them check out the Seal at the rear of the box where the tail shaft goes in. Because the car had been sitting for 6 months not doing a thing, The seal had compressed slightly and was allowing the leak to occur. The result was full service and had the seal replaced at the same time for $280. I cant believe how much smoother the gears change now after that service. Well worth the cash I think but next time will service myself. Just gotta get some good stands......
all4fordau is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:35 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL