|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
24-04-2005, 03:47 PM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2005
Posts: 4
|
I have started installing an alarm into an EA falcon. I have run into trouble in wirrig up the indicators to the alarm.
The alarm unit has 2 wires that need t obe connected into the left and right indicators. I have tried to splice them into the hazard lights at the bottom of the loom that connectes the indicators/horn/wippers. The first time I connected it up it, it worked fine and I was a happy man. Then I soldered it all up and things got funky. When I tested it, the the oil and battery light where the ones flashing and the incators did nothing. I checked the indicators to ensure they work correctly and they did. I couldnt figure out what was going wrong Next I would try and wire it into the wires that connect to the indicator stalk. I traced the wire and cut the connections, but the incdiators still worked!!! I cant figure this out! I am trying to obation a wiring diagram to determine if I can figure this out. Is there any one here that can help me out. Thanks |
||
|
|
|
24-04-2005, 04:38 PM
|
#2 | ||
|
Shoot.
Join Date: Jan 2005
Location: Melbourne
Posts: 4,909
|
Hahaha is that you Trav?! You've certainly made a mess of the EA :P
__________________
20V Turbo |
||
|
|
|
|
24-04-2005, 04:46 PM
|
#3 | ||
|
Shoot.
Join Date: Jan 2005
Location: Melbourne
Posts: 4,909
|
BTW, how do you run the wires for the tweeter through the dash in an EA? (Same one)
__________________
20V Turbo |
||
|
|
|
|
24-04-2005, 06:20 PM
|
#4 | ||
|
Low and Loud
Join Date: Dec 2004
Location: Melbourne
Posts: 3,273
|
To make the indicators flash, as I just fitted an immobiliser to my car, you need to wire the Alarm wires to the 1st and 3rd Wires (Green & Green/blue i think) on the stalk connector.
__________________
1993 Ford Fairlane NC3 Silver - LTD mockup, Worked V8 & Auto, Fully Optioned, Half of my Audio department at work installed in the car 1993 Ford Falcon XR6 Poly Green Stationwagon - 4.0 I6, Auto, 3:45LSD, All the usual XR6 Stuff but in a wagon  :
|
||
|
|
|
|
25-04-2005, 01:45 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Melbourne
Posts: 1,382
|
yep indicators are green and green/blue. Just pick up the wires under the steering column where they go into the plug.
|
||
|
|
|
EA alarm installation
Linear Mode
