|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-02-2009, 02:23 PM
|
#1 | ||
|
Regular Member
Join Date: Dec 2008
Location: Brisbane
Posts: 38
|
After starting the car (AU1) the airbag light flashes 3 times then 2 times, does this several times and then just stays on. I've tried searching and from what I found this would mean error code 32? Driver airbag circuit open? Is this right?
I've checked the fuses and they are fine, Is there anything else I can check? Cheers.... |
||
|
|
|
04-02-2009, 08:06 PM
|
#2 | ||
|
When in doubt, GAS IT!!
Join Date: Sep 2006
Location: Lower Eyre Peninsula, SA
Posts: 3,018
|
If everything else looks ok my guess would be the clock spring in the steering column. It happened to my wagon so I just went to a wrecker and picked up a replacement and fitted it myself. Hardest part about the job was finding someone with the correct 5 sided torx bit to get the airbag off. Once that was done it was a breeze.
Bushbasher
__________________
. HERS- BFIII Wagon Gold, alloys, dual fuel, bullbar, big tow pack, trans cooler, fully rebuilt HD suspension, Clarion, alarmed, full 2 1/2" sports system, mint body MINE- AUII Forte Meteorite, dual fuel but otherwise bog stock. MINE- AUII Fairlane Sportsman Liquid Silver over meteorite,HIDs', Airhog, Eagle Leads, dual fuel, custom rear springs, BA slotted discs + a second one for spares . |
||
|
|
|
|
04-02-2009, 08:09 PM
|
#3 | |||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Moree, NSW
Posts: 2,076
|
Check, pull apart and clean all connections under the seats.
__________________
Nathan 2005 FPV BF Super Pursuit The new toy (now sold) The SP The old ute (sold) www.aufalcon.com/nc1183 Build Thread Quote:
|
|||
|
|
|
|
04-02-2009, 08:19 PM
|
#4 | |||
|
Regular Member
Join Date: Dec 2008
Location: Brisbane
Posts: 38
|
Quote:
That might explain why the horn doesn't work as well. I've changed one in a XH ute before but it didn't have an airbag. I will check the connections tomorrow... |
|||
|
|
|
error code 32?
Linear Mode
