Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > ASL automedia

ASL automedia Specialising in the upgrade of BA/BF/Territory and FG audio and visual systems. We also repair all Ford (OEM) car stereos and produce OEM quality wiring harnesses. Website Link

Reply
 
Thread Tools Display Modes
Old 18-08-2010, 10:11 PM   #1
Andrew92
Regular Member
 
Join Date: Dec 2008
Posts: 117
Default ef falcon

do u guys know what size the front speakers are in a ef falcon? will 5.25inc speakers fit in the front? also what size are the speakers in a fg? will 5.25inc speakers fit in that?

Andrew92 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2010, 07:47 AM   #2
FADI75
Sponsor
 
Join Date: Jun 2005
Location: melbourne
Posts: 2,043
Default

Quote:
Originally Posted by crazy_xr6
do u guys know what size the front speakers are in a ef falcon? will 5.25inc speakers fit in the front? also what size are the speakers in a fg? will 5.25inc speakers fit in that?

hi

not too sure, your best is to see a website sponsor and ask them the question FTG autosalvage


cheers

ASL
__________________
FROM FALCON BA THROUGH FGX, TERRITORY SX THROUGH SZ - ICC UPGRADES, REPAIRS & INTEGRATION SPECIALISTS
AUTHORISED FORD REPAIR CENTRE
website: www.aslautomedia.com.au
email: info@aslautomedia.com
AUDIO INTERFACES, REVERSE CAMERAS, SATELLITE NAVIGATION & VIDEO INTEGRATION ON FACTORY COLOR SCREEN
FADI75 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2010, 09:24 AM   #3
MAD
Petro-sexual
 
MAD's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 4,527
Default

5.25" is just about a perfect fit in the EF. Depending on how the speaker manufacturer measures their speaker, you can fit up to a 6.5".


Here is something I found a while ago when searching for similar answers.
Quote:
Originally Posted by Pyroay
EF/EL Door Measurements

Hole size: 126mm
Width around hole: 160mm ( recessed section around hole)

Allowing 2-3mm gap to clear the window the following is a guide to the max mounting depth allowable
Depth @ top of hole 60mm
Depth @ centre of hole 70mm
Depth @ bottom of hole 72mm

If you use a 12mm MDF spacer ring then the maximum depth in hole centre is 92mm. Below is a 4" midrange mounted on a 6mm MDF spacer with rubber under one side to give it an angle

Max depth speaker you could fit into the door and still have the window wind up and the door skin fit on would be 92mm deep in the middle.

An additional spacer ring can be made up to 12mm thick and this gives an additional 12mm mounting depth without fouling on the standard door skin and allow the mounting of 6.5” speakers. Alternatively you can use 9mm MDF and use some rubber under the front edge to give it some backwards angle (which is desirable) Even a few degrees can make a big difference.
__________________
EL Fairmont Ghia - Manual - Supercharged
- The Story
MAD is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2010, 06:08 PM   #4
Andrew92
Regular Member
 
Join Date: Dec 2008
Posts: 117
Default

thanks guys.
Andrew92 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 12:33 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL